Trusted & Recognized name in the stainless steel industry!
Manufacturer of IBR ASTM A333 Grade 6 Pipes, IBR ASME SA333 Gr 6 LTCS Pipes, ASTM A333 Gr6 Carbon Steel IBR Pipe
IBR Low-Temperature ASTM A333 Grade 6 Carbon Steel Pipes
ASTM A333 is the specification by American Society for Testing and material Specification setting the standards for welded and seamless pipes which are intended to be used and are designed for the low temperature areas. These pipes are classified into various grades depending upon their ability to resist temperature and their tensile strength. The ASTM A333 Grade 6 IBR Pipe are used to transport gases and steam in places where the temperature is really low. The IBR specification is intended for the pipes which are capable of carrying steam right from the boiler to the intended place without changing the form of the steam or gas.
Since these pipes are dedicated for such a crucial work, they have to be passed through various tests to make sure that they perform with their full efficiency. Some of the tests through which the ASTM A333 Grade 6 IBR Pipe have to go through are impact tests, tensile tests, hydrostatic tests, temperature tests and nondestructive electric tests. Only after passing these tests and given specifications and standards the pipe is eligible to be sold in the market.
Talking about the Grade 6 of these pipes, the pipes of this grade hold the lowest temperature for strike test as -45 degree C or -50 degree F. Its tensile strength is calculated as less than or equal to 415 MPa and its yield point are calculated as less than or equal to 240 MPa. The ASTM A333 Grade 6 IBR Pipe has elongation of up to 30 percent.
Low Temperature Carbon Steel ASTM A333 Grade 6 IBR Welded Pipe, ASTM A333 Grade 6 IBR LTCS Pipes Exporter, IBR Carbon Steel Pipes, ASTM A333 Gr 6 IBR Pipe Stockist in India, ASME SA333 Gr 6 IBR Steel Pipes, ASTM A333 Gr.6 IBR Pipe, ASTM A333 Grade 6 IBR Carbon Steel Seamless Pipes Stockholder, Standard Size ASTM A333 Grade 6 IBR Low Temperature Pipes Supplier.
Standard Specification For ASTM A333 Grade 6 IBR Pipe
|Specification||ASTM A333 / ASME SA333|
|Type||Hot Rolled / Cold Drawn|
|Outer Diameter Size||1/4" NB To 30" NB (Nominal Bore Size)|
|Wall Thickness||Schedule 20 To Schedule XXS (Heavier On Request) Up to 250 mm Thickness|
|Length||5 To 7 Meters, 09 To 13 Meters, Single Random Length, Double Random Length And Customize Size.|
|Pipe Ends||Plain Ends / Beveled Ends / threaded Ends/ Coupling|
|Surface Coating||Epoxy Coating / Colour Paint Coating / 3LPE Coating.|
|Delivery Conditions||As Rolled, Normalizing Rolled, Thermomechanical Rolled / Formed, Normalizing Formed, Normalized and Tempered / Quenched and Tempered - BR / N / Q /T|
|Packaging||Loose / Bundle / Wooden Pallet / Wooden Box / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector|